AES6001 | 24 x 10G SFP+, 6 x 100G QSFP28
Ethernet L3 Switch, 24 x 10Gb SFP+ and 6 x 100Gb QSFP28, Support VXLAN & MLAG, 1+1 redundant power supplies, 3+1 hot-swappable fans
- 24×10Gb SFP+ and 6×100Gb QSFP28 ports, backward compatible with 40G
- 1+1 hot-swappable power supplies, 3+1 smart fans, front-to-back airflow
- Supports VXLAN, EVPN, and MLAG for scalable data center virtualization
- Supports OSPF/OSPFv3, BGP4/BGP4+, IS-IS, BFD, VRRP, and MPLS
- Supports sFlow and RSPAN; manageable via Web, CLI, SNMP, and SSH
| Ports | 24 x 10G SFP+ & 6 x 100G QSFP28 |
| Switching Capacity | 1.7 Tbps |
| IPv4 Routes | 16K |
| IPv6 Routes | 8K |
| Forwarding Rate | 600 Mpps |
| Flash Memory | 4 GB |
| MAC Address Table | 128K |
| Power Capacity | 350W x 2 |
| Fans | 4 (3+1 Redundancy), Hot-swappable |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Power Supplies | 2 (1+1 Redundancy), Hot-swappable |
| Dimensions (L x W x H) | 17.32″ x 16.14″ x 1.73″ (440 x 410 x 44 mm) |
AES6002 | 48 x 10G SFP+, 6 x 100G QSFP28
Ethernet L3 Switch, 48 x 10Gb SFP+ and 6 x 100Gb QSFP28, Support VXLAN & MLAG, 1+1 redundant power supplies, 3+1 hot-swappable fans
Features
- 48×10Gb SFP+ and 6×100Gb QSFP28 ports, backward compatible with 40G
- 1+1 hot-swappable power supplies, 3+1 smart fans, front-to-back airflow
- Supports VXLAN, EVPN, and MLAG for scalable data center virtualization
- Supports OSPF/OSPFv3, BGP4/BGP4+, IS-IS, BFD, VRRP, and MPLS
- Supports sFlow and RSPAN; manageable via Web, CLI, SNMP, and SSH
| Ports | 24 x 10G SFP+ & 6 x 100G QSFP28 |
| Switching Capacity | 1.7 Tbps |
| IPv4 Routes | 16K |
| IPv6 Routes | 8K |
| Forwarding Rate | 600 Mpps |
| Flash Memory | 4 GB |
| MAC Address Table | 128K |
| Power Capacity | 350W x 2 |
| Fans | 4 (3+1 Redundancy), Hot-swappable |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Power Supplies | 2 (1+1 Redundancy), Hot-swappable |
| Dimensions (L x W x H) | 17.32″ x 16.14″ x 1.73″ (440 x 410 x 44 mm) |
AES6101 | 48 x 25G SFP28, 6 x 100G QSFP28
Ethernet L3 Switch, 48 x 25Gb QSFP28 and 6 x 100Gb QSFP28, Support VXLAN & MLAG, 1+1 redundant power supplies, 4+1 hot-swappable fans
Features
- 48×25Gb SFP28 and 6×100Gb QSFP28 ports, backward compatible with 10G/40G
- 1+1 hot-swappable power supplies, 4+1 smart fans, front-to-back airflow
- Supports VXLAN, EVPN, and MLAG for scalable data center virtualization
- Supports OSPF/OSPFv3, BGP4/BGP4+, IS-IS, BFD, VRRP, and MPLS
- Supports sFlow and RSPAN; manageable via Web, CLI, SNMP, and SSH
| Ports | 48 x 10G SFP+ & 6 x 100G QSFP28 |
| Switching Capacity | 3.6 Tbps |
| IPv4 Routes | 128K |
| IPv6 Routes | 64K |
| Forwarding Rate | 1050 Mpps |
| Flash Memory | 8 GB |
| MAC Address Table | 128K |
| Power Capacity | 550W x 2 |
| Fans | 5 (4+1 Redundancy), Hot-swappable |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Power Supplies | 2 (1+1 Redundancy), Hot-swappable |
| Dimensions (L x W x H) | 17.32″ × 18.50″ × 1.73″ (440 × 470 × 44 mm) |
AES6102 | 48 x 25G SFP28, 8 x 100G QSFP28
Ethernet L3 Switch, 48 x 25Gb QSFP28 and 8 x 100Gb QSFP28, Support VXLAN&MLAG, 1+1 redunt power supplies, 4+1 hot-swappable fans
Features
- 48×25Gb SFP28 and 8×100Gb QSFP28 ports, backward compatible with 10G/40G
- 1+1 hot-swappable power supplies, 4+1 smart fans, front-to-back airflow
- Supports VXLAN, EVPN, and MLAG for scalable data center virtualization
- Supports OSPF/OSPFv3, BGP4/BGP4+, IS-IS, BFD, VRRP, and MPLS
- Supports sFlow and RSPAN; manageable via Web, CLI, SNMP, and SSH
| Ports | 48 x 25G SFP28 & 8 x 100G QSFP28 |
| Switching Capacity | 6.4 Tbps |
| IPv4 Routes | 216K |
| IPv6 Routes | 108K |
| Forwarding Rate | 2800 Mpps |
| Flash Memory | 8 GB |
| MAC Address Table | 128K |
| Power Capacity | 800W x 2 |
| Fans | 5 (4+1 Redundancy), Hot-swappable |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Power Supplies | 2 (1+1 Redundancy), Hot-swappable |
| Dimensions (L x W x H) | 17.32″ × 18.50″ × 1.73″ (440 × 470 × 44 mm) |
AES6201 | 32 x 100G QSFP28
32-Port Ethernet L3 Switch, 32 x 100Gb QSFP28, Support VXLAN&MLAG, 1+1 redunt power supplies, 4+1 hot-swappable fans
Features
- 32×100Gb QSFP28 ports, backward compatible with 40GbE
- 1+1 hot-swappable power supplies, 4+1 smart fans, front-to-back airflow
- Supports VXLAN, EVPN, and MLAG for scalable data center virtualization
- Supports OSPF/OSPFv3, BGP4/BGP4+, IS-IS, BFD, VRRP, and MPLS
- Supports sFlow and RSPAN; manageable via Web, CLI, SNMP, and SSH
| Ports | 32 x 100G QSFP28 |
| Switching Capacity | 6.4 Tbps |
| IPv4 Routes | 216K |
| IPv6 Routes | 108K |
| Forwarding Rate | 2800 Mpps |
| Flash Memory | 8 GB |
| MAC Address Table | 128K |
| Power Capacity | 800W x 2 |
| Fans | 5 (4+1 Redundancy), Hot-swappable |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Power Supplies | 2 (1+1 Redundancy), Hot-swappable |
| Dimensions (L x W x H) | 17.32″ × 18.50″ × 1.73″ (440 × 470 × 44 mm) |
AES2012P | 24GE, 2GE Combo, 2GE SFP, PoE/PoE++ (LCD)
24-Port Gigabit L2+ PoE Enterprise Ethernet Switch, 24 x 10/100/1000Mbps PoE+ RJ45 + 2 x 1Gb Combo + 2 x 1Gb SFP, 370W Total PoE, IEEE 802.3af/at/bt, VLAN, ACL, QoS, DoS Protection.
Features
24×10/100/1000Mbps PoE+ RJ45 ports with total power budget up to 370W
Includes 2×1000Mbps Combo and 2×1000Mbps SFP uplinks for flexible network deployment
Fully compliant with IEEE 802.3af/at/bt PoE standards
Supports VLAN, ACL, QoS, LACP, DoS protection, and advanced Layer 2 management
Real-time port and load status monitoring via built-in LCD display
Flexible management via Web, CLI, SNMP, SSH, and AURC-Net
±4KV/±2KV surge protection for enhanced equipment safety
| Ports | 24GE+2GE Combo+2GE SFP PoE/PoE++ |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| Jumbo Frame | 9216 Bytes |
| MAC Address Table | 8K |
| Packet Buffer | 4.1Mbit |
| Surge Protection | Differential mode ±6KV, Common mode ±4KV |
| Dimensions (L x W x H) | 17.32″ x 8.15″ x 1.77″ (440 x 207 x 45mm) |
AES2011P | 24GE, 2GE Combo, 2GE SFP, PoE/PoE+ (LCD)
24-Port Gigabit L2+ PoE Enterprise Ethernet Switch, 24 x 10/100/1000Mbps PoE+ RJ45 + 2 x 1Gb Combo + 2 x 1Gb SFP, 370W Total PoE, Enterprise QoS, Advanced Security, CCTV Functions.
Features
24×10/100/1000Mbps PoE+ RJ45 ports with total power budget up to 370W
Includes 2×1000Mbps Combo and 2×1000Mbps SFP uplinks for flexible network deployment
Fully compliant with IEEE 802.3af/at PoE standards
Supports QoS, advanced security policies, CCTV functions, and rich Layer 2 management
Real-time port and load status monitoring via built-in LCD display
Flexible management via Web, CLI, SNMP, SSH, and AURC-Net
±4KV/±2KV surge protection for enhanced equipment safety
| Ports | 24GE+2GE Combo+2GE SFP PoE/PoE+ |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| Jumbo Frame | 9216 Bytes |
| MAC Address Table | 8K |
| Packet Buffer | 4.1Mbit |
| Surge Protection | Differential mode ±6KV, Common mode ±4KV |
| Dimensions (L x W x H) | 17.32″ x 8.15″ x 1.77″ (440 x 207 x 45mm) |
AES2010P | 8GE, 2GE SFP, PoE+ (LCD)
8-Port Gigabit L2+ PoE Enterprise Ethernet Switch, 8 x 10/100/1000Mbps PoE+ RJ45 + 2 x 1Gb SFP, 140W Total PoE, Enterprise QoS, Advanced Security, CCTV Functions.
Features
8×10/100/1000Mbps PoE+ RJ45 ports with total power budget up to 140W
Includes 2×1000Mbps SFP uplinks for flexible network deployment
Fully compliant with IEEE 802.3af/at PoE standards
Supports QoS, advanced security policies, CCTV functions, and rich Layer 2 management
Real-time port and load status monitoring via built-in LCD display
Flexible management via Web, CLI, SNMP, SSH, and AURC-Net
±4KV/±2KV surge protection for enhanced equipment safety
| Ports | 8GE+2GE+2GE SFP PoE+ |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| Jumbo Frame | 9216 Bytes |
| MAC Address Table | 8K |
| Packet Buffer | 4.1Mbit |
| Surge Protection | Differential mode ±6KV, Common mode ±4KV |
| Dimensions (L x W x H) | 11.02″ x 7.09″ x 1.73″ (280 x 180 x 44 mm) |
AIS2004P | 8GE, 12GE SFP, PoE/PoE+
8-Port Gigabit L2+ Industrial PoE+ Switch, 8 x PoE+ Ports @240W + 12 x 1Gb SFP, Fanless Design, -40 to 75°C Operating Temperature
Features
8×PoE+ ports (30W/port) and 12×1Gbps SFP ports for hybrid networks
Ideal for high-fiber PoE environments with wide-temp tolerance
±6KV/±4KV surge protection; dual power and alarm relay enhance stability
PD-Alive, SCP, one-click ring config, and storm suppression support
All-aluminum, corrosion-resistant shell with handheld portability
Manageable via AURC-Net, Web GUI, SSH, and Telnet
| Ports | 8GE+12GE SFP PoE/PoE+ |
| Switching Capacity | 40 Gbps |
| Forwarding Rate | 29.76 Mpps |
| Jumbo Frame | 9216 Bytes |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 5.71″ x 4.29″ x 2.44″ (145 x 109 x 62mm) |
AIS2004 | 8GE, 12GE SFP
8-Port Gigabit L2+ Industrial Ethernet Switch, 8 x 10/100/1000Mbps RJ45 + 12 x 1Gb SFP, Fanless Design, -40 to 75°C Operating Temperature
Features
8×Gigabit RJ45 and 12×SFP ports for high-density fiber deployments
Wide-temp support (-40°C to 75°C) in a lightweight, corrosion-resistant build
±6KV/±4KV surge protection, dual power supply, and relay alarm output
One-key ring config, PD-Alive, broadcast storm control for stable networking
Compact, fanless design with strong heat dissipation
Centralized via AURC-Net platform; installer-friendly portable build
| Ports | 8GE+12GE SFP |
| Switching Capacity | 40 Gbps |
| Forwarding Rate | 29.76 Mpps |
| Jumbo Frame | 9216 Bytes |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 5.71″ x 4.29″ x 2.44″ (145 x 109 x 62mm) |
AIS2002P | 8GE, 2GE SFP, PoE/PoE+
8-Port Gigabit L2+ Industrial PoE+ Switch, 8 x PoE+ Ports @240W + 2 x 1Gb SFP, Fanless Design, -40 to 75°C Operating Temperature
Features
8×PoE+ RJ45 ports and 2×SFP fiber ports; 30W per port
Durable, fanless design for harsh industrial environments
Operates between -40°C and 75°C with full surge and ESD protection
One-key ring config, PD-Alive, SCP, dual power with restart and relay alarm
Easy to deploy and install with handheld, corrosion-resistant design
Unified management through AURC-Net, Web, SSH, and Telnet
| Ports | 8GE+2GE SFP PoE/PoE+ |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 4.33″ x 3.54″ x 1.81″ (110 x 90 x 46mm) |
AIS2002 | 8GE, 2GE SFP
8-Port Gigabit L2+ Industrial Ethernet Switch, 8 x 10/100/1000Mbps RJ45 + 2 x 1Gb SFP, Fanless Design, -40 to 75°C Operating Temperature
Features
8×10/100/1000Mbps RJ45 ports and 2×1Gbps SFP uplinks
Wide temperature and ruggedized all-aluminum build (-40°C to 75°C)
Surge protection: ±6KV/±4KV; supports power-off recovery and relay alarm
Built-in PD-Alive, SCP, broadcast storm suppression, and ring support
Dual power inputs for redundancy and reliability in field deployments
Lightweight and easy to manage via AURC-Net and console interfaces
| Ports | 8GE+2GE SFP |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 4.33″ x 3.54″ x 1.81″ (110 x 90 x 46mm) |
AIS2003P | 8GE, 4G Combo, PoE/PoE+
8-Port Gigabit L2+ Industrial PoE+ Switch, 8 x PoE+ Ports @240W + 4 x Combo GE Ports, Fanless Design, -40 to 75°C Operating Temperature
Features
8×PoE+ RJ45 ports and 4×1Gbps combo uplinks (RJ45/SFP)
Integrated PoE+ (30W/port) reduces wiring cost for smart devices
Operates at -40°C to 75°C with fanless, corrosion-resistant design
Industrial reliability: ±6KV surge, dual power, PD-Alive, SCP, alarm relay
Easy ring network setup and remote fault response
AURC-Net unified management and handheld enclosure for field flexibility
| Ports | 8GE+4G Combo PoE/PoE+ |
| Switching Capacity | 24 Gbps |
| Forwarding Rate | 17.86 Mpps |
| Jumbo Frame | 9216 Bytes |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 5.71″ x 4.29″ x 2.44″ (145 x 109 x 62mm) |
AIS2003 | 8GE, 4G Combo
8-Port Gigabit L2+ Industrial Ethernet Switch, 8 x 10/100/1000Mbps RJ45 + 4 x Combo GE Ports, Fanless Design, -40 to 75°C Operating Temperature
Features
8×Gigabit RJ45 and 4×combo ports (RJ45/SFP) for copper/fiber uplink flexibility
All-aluminum housing with wide -40°C to 75°C operating range
Built-in ±6KV/±4KV surge protection and relay alarm for system stability
One-click ring network setup, storm suppression, PD-Alive supported
Dual power inputs with auto-reboot and alarm output
Centralized management via AURC-Net platform; portable, rugged build
| Ports | 8GE+4G Combo |
| Switching Capacity | 24 Gbps |
| Forwarding Rate | 17.86 Mpps |
| Jumbo Frame | 9216 Bytes |
| Packet Buffer | 4.1Mbit |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 5.71″ x 4.29″ x 2.44″ (145 x 109 x 62mm) |
AIS2001P | 4GE, 2GE SFP, PoE/PoE+
4-Port Gigabit L2+ Industrial PoE+ Switch, 4 x PoE+ Ports @120W + 2 x 1Gb SFP, Fanless Design, -40 to 75°C Operating Temperature
Features
Ports: 4GE+2GE SFP PoE/PoE+
Jumbo Frame: 9216Bytes
Switching Capacity: 12 Gbps
Forwarding Rate: 8.92 Mpps
Packet Buffer: 4.1Mbit
Surge Protection: Differential mode ±2KV. Common mode ±6KV
Dimensions (LxWxH): 4.33″ × 3.54″ × 1.81″ (110*90*46mm)
Operating Temperature: -40°C ~ 75°C(-40°F to 167°F)
Operating Humidity: 5% ~ 95% non-condensing
| Ports | 4GE+2GE SFP PoE/PoE+ |
| Switching Capacity | 12 Gbps |
| Forwarding Rate | 8.92 Mpps |
| Jumbo Frame | 9216 Bytes |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 4.33″ x 3.54″ x 1.81″ (110 x 90 x 46mm) |
AIS2001 | 4GE, 2GE SFP
4-Port Gigabit L2+ Industrial Ethernet Switch, 4 x 10/100/1000Mbps RJ45 + 2 x 1Gb SFP, Fanless Design, -40 to 75°C Operating Temperature
Features
4×10/100/1000Mbps RJ45 ports and 2×1Gbps SFP uplinks for flexible connectivity
Wide operating temperature: -40°C to 75°C, fanless all-aluminum design
±6KV common mode & ±4KV differential surge protection for industrial safety
Supports one-key ring configuration, PD-Alive, and broadcast storm suppression
Dual power input design with power-down auto-restart and relay alarm support
Manageable via AURC-Net unified platform; compact and easy to install
| Ports | 4GE+2GE SFP |
| Switching Capacity | 12 Gbps |
| Forwarding Rate | 8.92 Mpps |
| Jumbo Frame | 9216 Bytes |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 4.33″ x 3.54″ x 1.81″ (110 x 90 x 46mm) |
AIS4001P | 8GE, 4G SFP+, PoE/PoE+
8-Port L2+ Industrial Ethernet Switch, 8×10/100/1000Mbps PoE+ RJ45 + 4×10Gbps SFP+, Fanless Design, -40 to 75°C Operating Temperature
Features
8×PoE+ RJ45 ports and 4×10Gbps SFP+ for high-speed PoE+ uplink switching
Provides 30W per PoE port for edge power distribution
Industrial-grade housing, -40°C to 75°C, surge-protected and fanless
Dual power inputs with restart, relay alarm, and PD-Alive features
Simplified ring topology configuration and broadcast storm control
Unified via AURC-Net platform; portable, corrosion-proof construction
| Ports | 8GE+4G SFP+ PoE/PoE+ |
| Switching Capacity | 96 Gbps |
| Forwarding Rate | 71.42 Mpps |
| Jumbo Frame | 12k Bytes |
| Packet Buffer | 12Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±4KV |
| Dimensions (L x W x H) | 5.71″ x 4.29″ x 2.44″ (145 x 109 x 62mm) |
AIS4001 | 8GE, 4G SFP+
8-Port L2+ Industrial Ethernet Switch, 8 x 10/100/1000Mbps RJ45 + 4 x 10Gb SFP+, Fanless Design, -40 to 75°C Operating Temperature
Features
8×Gigabit RJ45 ports and 4×10Gbps SFP+ uplinks for high-throughput needs
Rugged fanless design with wide -40°C to 75°C operation range
±6KV/±4KV surge immunity, dual power input, alarm output
Supports PD-Alive, ring setup, storm suppression, and SCP
Compact aluminum enclosure, corrosion-resistant and easy to mount
Remote management via AURC-Net platform and standard CLI/Web/SSH
| Ports | 8GE+4G SFP+ |
| Switching Capacity | 96 Gbps |
| Forwarding Rate | 71.42 Mpps |
| Jumbo Frame | 12k Bytes |
| Packet Buffer | 12Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±4KV |
| Dimensions (L x W x H) | 5.71″ x 4.29″ x 2.44″ (145 x 109 x 62mm) |
AES4001 | 24GE, 4 SFP+
24-Port Gigabit L2+ Enterprise Ethernet Switch, 24 × 10/100/1000Mbps RJ45 + 4 × 10Gb SFP+, Static Routing, VLAN, QoS
Features
24 Gigabit ports with 4x 10G SFP+ uplinks for fast aggregation
Supports VLAN, ACL, LACP, QoS, and flow control features
Compact metal design with fanless cooling for silent operation
Centralized management via AURC-Net, Web, CLI, and SSH
±4KV/±2KV surge protection and DoS defense for reliability
| Ports | 24GE+4 SFP+ |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.23 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 16K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 17.36″ x 8.15″ x 1.75″ (441 x 207 x 44.4 mm) |
AES4001P | 24GE, 4 SFP+, PoE/PoE+
24-Port Gigabit L2+ PoE Enterprise Ethernet Switch, 24 × 10/100/1000Mbps PoE+ RJ45 + 4 × 10Gb SFP+, 30W/Port, Static Routing, VLAN, QoS.
Features
24 PoE+ ports supporting up to 30W each, total power 370W
4x 10G SFP+ uplinks and console port for flexible deployment
Supports APs, IP cameras, and other powered devices
Includes VLAN, ACL, LACP, QoS, and flow control features
Centralized management via AURC-Net, Web, CLI, and SSH
±4KV/±2KV surge protection and DoS defense for reliability
| Ports | 24GE+4 SFP+ PoE/PoE+ |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.23 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 16K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 17.36″ x 8.15″ x 1.75″ (441 x 207 x 44.4 mm) |
AES4201 | 8 10GE
8-Port Multi-Gigabit L2+ Enterprise Ethernet Switch, 8 × 10M/100M/1G/2.5G/5G/10G RJ45, Static Routing, VLAN, QoS.
Features
8 multi-gigabit RJ45 ports (1G/2.5G/5G/10G) for high-speed access
Full wire-speed forwarding with dynamic memory allocation
Supports VLAN, ACL, QoS, and static routing
Compact design with auto MDI/MDIX support
Centralized management via AURC-Net, Web, CLI, and SSH
±4KV/±2KV surge protection and DoS defense for reliability
| Ports | 8 10GE |
| Switching Capacity | 160 Gbps |
| Forwarding Rate | 119.04 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 16K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 8.66″ x 5.91″ x 1.73″ (220 x 150 x 44 mm) |
AES4002 | 48 GE+6 SFP+
48-Port Gigabit L2+ Enterprise Ethernet Switch, 48 × 10/100/1000Mbps RJ45 + 6 × 10Gb SFP+, Static Routing, VLAN, QoS.
Features
48 Gigabit ports with 6x 10G SFP+ uplinks and console port
Designed for high-density enterprise deployment
Supports VLAN, ACL, LACP, QoS, and flow control features
Centralized management via AURC-Net, Web, CLI, and SSH
±4KV/±2KV surge protection and DoS defense for reliability
| Ports | 48GE+6 SFP+ |
| Switching Capacity | 216 Gbps |
| Forwarding Rate | 160.71 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 32K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 17.32″ x 10.24″ x 1.73″ (440 x 260 x 44 mm) |
AES4002P | 48 GE+6 SFP+, PoE/PoE+
48-Port Gigabit L2+ PoE Enterprise Ethernet Switch, 48 × 10/100/1000Mbps PoE+ RJ45 + 6 × 10Gb SFP+, 30W/Port, Static Routing, VLAN, QoS
Features
48 PoE+ ports supporting up to 30W each, total power 370W
6x 10G SFP+ uplinks and console port for flexible deployment
Supports APs, IP cameras, and other powered devices
Includes VLAN, ACL, LACP, QoS, and flow control features
Centralized management via AURC-Net, Web, CLI, and SSH
±4KV/±2KV surge protection and DoS defense for reliability
| Ports | 48GE+6 SFP+ PoE/PoE+ |
| Switching Capacity | 216 Gbps |
| Forwarding Rate | 160.71 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 32K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 17.32″ x 12.99″ x 1.73″ (440 x 330 x 44mm) |
AES4202 | 8 SFP+
8-Port 10Gb L2+ Enterprise SFP+ Switch, 8 × 10Gb SFP+, Static Routing, VLAN, QoS
Features
8x 10G SFP+ ports for high-speed fiber uplink or core connection
Store-and-forward switching with dynamic memory allocation
Supports VLAN, ACL, QoS, and flow control features
Compact fanless design with full AURC-Net compatibility
±2KV/±1KV surge protection and DoS defense for reliability.
| Ports | 8 SFP+ |
| Switching Capacity | 160 Gbps |
| Forwarding Rate | 119.04 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 16K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Surge Protection | Common mode ±2KV, Differential mode ±1KV |
| Dimensions (L x W x H) | 6.61″ x 3.70″ x 1.26″ (168 x 94 x 32mm) |
AES4010 | 16G SFP+, 8G Combo, 4 SFP+
16-Port Gigabit L2+ Enterprise Aggregation Switch, 16 × 1Gb SFP + 8 × 1Gb Combo + 4 × 10Gb SFP+, Static Routing, VLAN, QoS
Features
16x 1G SFP fiber ports, 8x combo ports, 4x 10G SFP+ uplinks
Supports VLAN, ACL, LACP, QoS, and static routing
Ideal for fiber-rich enterprise environments
Centralized management via AURC-Net, Web, CLI, and SSH
±4KV/±2KV surge protection and DoS defense for reliability
| Ports | 16G SFP+ + 8G Combo + 4 SFP+ |
| Switching Capacity | 128 Gbps |
| Forwarding Rate | 95.23 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 16K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 17.32″ x 10.24″ x 1.73″ (440 x 260 x 44 mm) |
AES4101 | 8 x 2.5G, 2 x 10GE, 2 x 10G SFP+
8-Port Multi-Gigabit L2+ Enterprise Ethernet Switch, 8 × 2.5Gb RJ45 + 2 × 10Gb RJ45 + 2 × 10Gb SFP+, Static Routing, VLAN, QoS
Features
8x 2.5G RJ45 ports, 2x 10G RJ45 uplinks, 2x 10G SFP+ uplinks
Multi-rate access optimized for high-speed APs and edge servers
Includes VLAN, ACL, LACP, QoS, and flow control features
Centralized management via AURC-Net, Web, CLI, and SSH
±4KV/±2KV surge protection and DoS defense for reliability
| Ports | 8×2.5G + 2×10GE + 2×10G SFP+ |
| Switching Capacity | 120 Gbps |
| Forwarding Rate | 89.28 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 16K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 12.99″ x 9.06″ x 1.73″ (330 x 230 x 44 mm) |
AES4101P | 8 x 2.5G, 2 x 10GE, 2 x 10G SFP+, PoE/PoE+
8-Port Multi-Gigabit L2+ PoE Enterprise Ethernet Switch, 8 × 2.5Gb PoE+ RJ45 + 2 × 10Gb RJ45 + 2 × 10Gb SFP+, 30W/Port, Static Routing, VLAN, QoS
Features
8x 2.5G PoE+ ports supporting 30W each, total power 240W
2x 10G RJ45 uplinks and 2x 10G SFP+ uplinks
Supports powered APs, surveillance, and edge devices
Includes VLAN, ACL, LACP, QoS, and flow control features
Centralized management via AURC-Net, Web, CLI, and SSH
±4KV/±2KV surge protection and DoS defense for reliability
| Ports | 8×2.5G + 2×10GE + 2×10G SFP+ PoE/PoE+ |
| Switching Capacity | 120 Gbps |
| Forwarding Rate | 89.28 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 16K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 12.99″ x 9.06″ x 1.73″ (330 x 230 x 44 mm) |
AES4102 | 24 x 2.5GE +2 x 10GE+4 x 10GE SFP+
24-Port Multi-Gigabit L2+ Enterprise Ethernet Switch, 24 × 2.5Gb RJ45 + 2 × 10Gb RJ45 + 4 × 10Gb SFP+, Static Routing, VLAN, QoS
Features
24x 2.5G RJ45 ports, 2x 10G RJ45 uplinks, 4x 10G SFP+ uplinks
Supports high-speed access and seamless network expansion
Includes VLAN, ACL, LACP, QoS, and flow control features
Centralized management via AURC-Net, Web, CLI, and SSH
±4KV/±2KV surge protection and DoS defense for reliability
| Ports | 24×2.5G+2x10GE+4x10G SFP+ |
| Switching Capacity | 240 Gbps |
| Forwarding Rate | 178.56 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 32K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 17.32″ x 10.24″ x 1.73″ (440 x 260 x 44 mm) |
AES4102P | 24 x 2.5GE +2 x 10GE+4 x 10GE SFP+, PoE/PoE+
24-Port Multi-Gigabit L2+ PoE Enterprise Ethernet Switch, 24 × 2.5Gb PoE+ RJ45 + 2 × 10Gb RJ45 + 4 × 10Gb SFP+, 30W/Port, Static Routing, VLAN, QoS
Features
24x 2.5G PoE+ ports supporting up to 30W each
2x 10G RJ45 uplinks and 4x 10G SFP+ uplinks
Designed for high-performance PoE edge deployment
Includes VLAN, ACL, LACP, QoS, and flow control features
Centralized management via AURC-Net, Web, CLI, and SSH
±4KV/±2KV surge protection and DoS defense for reliability
| Ports | 24×2.5G+2x10GE+4x10G SFP+ PoE/PoE+ |
| Switching Capacity | 240 Gbps |
| Forwarding Rate | 178.56 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 32K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 17.32″ x 10.24″ x 1.73″ (440 x 260 x 44 mm) |
AES2002 | 24GE, 2GE Combo, 2GE SFP
24-Port Gigabit L2+ Enterprise Ethernet Switch, 24 x 10/100/1000Mbps RJ45 + 2 x 1Gb Combo + 2 x 1Gb SFP, Rich L2 Features, Static Routing, VLAN, QoS
Features
24 Gigabit ports with 2×combo + 2×SFP uplinks
Supports static routing, VLAN segmentation, and ACL filtering
IEEE802.3x and LACP link aggregation for bandwidth and redundancy
DoS protection and flow control for network security and stability
Managed via Console, SSH, Web, and SNMP
±4KV/±2KV surge protection ensures system reliability
| Ports | 24GE+2GE Combo+2GE SFP |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| Jumbo Frame | 9216 Bytes |
| MAC Address Table | 8K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 17.32″ x 8.19″ x 1.73″ (440 x 208 x 44 mm) |
AES2002P | 24GE, 2GE Combo, 2GE SFP, PoE/PoE+
24-Port Gigabit L2+ PoE Enterprise Ethernet Switch, 24 x 10/100/1000Mbps PoE+ RJ45 + 2 x 1Gb Combo + 2 x 1Gb SFP, 370W Total PoE, Static Routing, VLAN, QoS
Features
Up to 24 PoE+ ports with total power budget of 370W
Includes 2×combo + 2×SFP uplinks for flexible network deployment
Fully compliant with IEEE 802.3af/at PoE standards
Supports VLAN, ACL, QoS, LACP, and DoS protection
Flexible management via Web, CLI, SNMP, SSH, and AURC-Net
±4KV/±2KV surge protection for enhanced equipment safety
| Ports | 24GE+2GE Combo+2GE SFP PoE/PoE+ |
| Switching Capacity | 56 Gbps |
| Forwarding Rate | 41.66 Mpps |
| Jumbo Frame | 9216 Bytes |
| MAC Address Table | 8K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 17.32″ x 8.15″ x 1.73″ (440 x 207 x 44mm) |
AES2003 | 48 GE, 4 GE SFP
Features
48 Gigabit ports with 6x 10G SFP+ uplinks and console port
Designed for high-density enterprise deployment
Supports VLAN, ACL, LACP, QoS, and flow control features
Centralized management via AURC-Net, Web, CLI, and SSH
±4KV/±2KV surge protection and DoS defense for reliability
| Ports | 48GE+4GE SFP |
| Switching Capacity | 104 Gbps |
| Forwarding Rate | 77.38 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 16K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±2KV, Differential mode ±1KV |
| Dimensions (L x W x H) | 17.32″ x 10.24″ x 1.73″ (440 x 260 x 44 mm) |
AES2003P | 48 GE, 4 GE SFP, PoE/PoE+
48-Port Gigabit L2+ PoE Enterprise Ethernet Switch, 48 x 10/100/1000Mbps PoE+ RJ45 + 4 x 1Gb SFP, 30W/Port, MDI/MDIX, Static Routing, VLAN, QoS
Features
48 PoE+ ports supporting up to 30W each, total power 370W
4×SFP uplinks and console port for flexible deployment
Supports APs, IP cameras, and other powered devices
Includes VLAN, ACL, LACP, QoS, and flow control features
Centralized management via AURC-Net, Web, CLI, and SSH
±2KV/±1KV surge protection and DoS defense for reliability
| Ports | 48GE+4GE SFP PoE/PoE+ |
| Switching Capacity | 104 Gbps |
| Forwarding Rate | 77.38 Mpps |
| Jumbo Frame | 12k Bytes |
| MAC Address Table | 16K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Surge Protection | Common mode ±2KV, Differential mode ±1KV |
| Dimensions (L x W x H) | 17.32″ x 12.99″ x 1.73″ (440 x 330 x 44mm) |
AES2001 | 8GE (AP), 2GE, 2SFP
8-Port Gigabit L2+ Enterprise Ethernet Switch, 8 x 10/100/1000Mbps RJ45 + 2 x 10/100/1000Mbps RJ45 + 2 x 1Gb SFP, Static Routing, VLAN, QoS
Features
12 Gigabit ports including 2×SFP uplinks for flexible expansion
Supports static routing, VLAN, QoS, and ACL policies
IEEE802.3x full-duplex and backpressure half-duplex flow control
Supports static and dynamic (LACP) link aggregation
Managed via Console, Telnet, SSH, Web, and AURC-Net platform
Built-in ±4KV/±2KV surge protection for equipment stability
| Ports | 8GE+2GE+2GE SFP |
| Switching Capacity | 24 Gbps |
| Forwarding Rate | 17.85 Mpps |
| Jumbo Frame | 10k Bytes |
| MAC Address Table | 8K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 11.02″ x 7.09″ x 1.73″ (280 x 180 x 44 mm) |
AES2001P | 8GE (AP), 2GE, 2SFP, PoE/PoE+
8-Port Gigabit L2+ PoE Enterprise Ethernet Switch, 8 x 10/100/1000Mbps PoE+ RJ45 + 2 x 10/100/1000Mbps RJ45 + 2 x 1Gb SFP, 30W PoE/Port, Static Routing, VLAN, QoS
Features
8 PoE+ ports with up to 30W output per port
12-port access with 2×SFP uplinks for uplink scalability
PoE compatibility with APs, IPCs, and standard PoE terminals
Supports static routing, VLAN, QoS, and ACL functions
Centralized management through AURC-Net and standard interfaces
±4KV/±2KV surge protection ensures reliable power delivery
| Ports | 8GE+2GE+2GE SFP PoE/PoE+ |
| Switching Capacity | 24 Gbps |
| Forwarding Rate | 17.85 Mpps |
| Jumbo Frame | 10k Bytes |
| MAC Address Table | 8K |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Surge Protection | Common mode ±4KV, Differential mode ±2KV |
| Dimensions (L x W x H) | 11.02″ x 7.09″ x 1.73″ (280 x 180 x 44 mm) |
AES6001 | 24 x 10G SFP+, 6 x 100G QSFP28
Ethernet L3 Switch, 24 x 10Gb SFP+ and 6 x 100Gb QSFP28, Support VXLAN & MLAG, 1+1 redundant power supplies, 3+1 hot-swappable fans
Features
24×10Gb SFP+ and 6×100Gb QSFP28 ports, backward compatible with 40G
1+1 hot-swappable power supplies, 3+1 smart fans, front-to-back airflow
Supports VXLAN, EVPN, and MLAG for scalable data center virtualization
Supports OSPF/OSPFv3, BGP4/BGP4+, IS-IS, BFD, VRRP, and MPLS
Supports sFlow and RSPAN; manageable via Web, CLI, SNMP, and SSH
| Ports | 24 x 10G SFP+ & 6 x 100G QSFP28 |
| Switching Capacity | 1.7 Tbps |
| IPv4 Routes | 16K |
| IPv6 Routes | 8K |
| Forwarding Rate | 600 Mpps |
| Flash Memory | 4 GB |
| MAC Address Table | 128K |
| Power Capacity | 350W x 2 |
| Fans | 4 (3+1 Redundancy), Hot-swappable |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Power Supplies | 2 (1+1 Redundancy), Hot-swappable |
| Dimensions (L x W x H) | 17.32″ × 16.14″ × 1.73″ (440 × 410 × 44 mm) |
AES6002 | 48 x 10G SFP+, 6 x 100G QSFP28
Ethernet L3 Switch, 48 x 10Gb SFP+ and 6 x 100Gb QSFP28, Support VXLAN & MLAG, 1+1 redundant power supplies, 3+1 hot-swappable fans
Features
48×10Gb SFP+ and 6×100Gb QSFP28 ports, backward compatible with 40G
1+1 hot-swappable power supplies, 3+1 smart fans, front-to-back airflow
Supports VXLAN, EVPN, and MLAG for scalable data center virtualization
Supports OSPF/OSPFv3, BGP4/BGP4+, IS-IS, BFD, VRRP, and MPLS
Supports sFlow and RSPAN; manageable via Web, CLI, SNMP, and SSH
| Ports | 48 x 10G SFP+ & 6 x 100G QSFP28 |
| Switching Capacity | 2.18 Tbps |
| IPv4 Routes | 16K |
| IPv6 Routes | 8K |
| Forwarding Rate | 600 Mpps |
| Flash Memory | 4 GB |
| MAC Address Table | 128K |
| Power Capacity | 350W x 2 |
| Fans | 4 (3+1 Redundancy), Hot-swappable |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Power Supplies | 2 (1+1 Redundancy), Hot-swappable |
| Dimensions (L x W x H) | 17.32″ × 16.14″ × 1.73″ (440 × 410 × 44 mm) |
AES6101 | 48 x 25G SFP28, 6 x 100G QSFP28
Ethernet L3 Switch, 48 x 25Gb QSFP28 and 6 x 100Gb QSFP28, Support VXLAN & MLAG, 1+1 redundant power supplies, 4+1 hot-swappable fans
Features
48×25Gb SFP28 and 6×100Gb QSFP28 ports, backward compatible with 10G/40G
1+1 hot-swappable power supplies, 4+1 smart fans, front-to-back airflow
Supports VXLAN, EVPN, and MLAG for scalable data center virtualization
Supports OSPF/OSPFv3, BGP4/BGP4+, IS-IS, BFD, VRRP, and MPLS
Supports sFlow and RSPAN; manageable via Web, CLI, SNMP, and SSH
| Ports | 48 x 25G SFP28 & 6 x 100G QSFP28 |
| Switching Capacity | 3.6 Tbps |
| IPv4 Routes | 128K |
| IPv6 Routes | 64K |
| Forwarding Rate | 1050 Mpps |
| Flash Memory | 8 GB |
| MAC Address Table | 128K |
| MAC Address Table | 64K |
| Power Capacity | 550W x 2 |
| Fans | 5 (4+1 Redundancy), Hot-swappable |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Power Supplies | 2 (1+1 Redundancy), Hot-swappable |
| Dimensions (L x W x H) | 17.32″ × 18.50″ × 1.73″ (440 × 470 × 44 mm) |
AES6102 | 48 x 25G SFP28, 8 x 100G QSFP28
Ethernet L3 Switch, 48 x 25Gb QSFP28 and 8 x 100Gb QSFP28, Support VXLAN&MLAG, 1+1 redunt power supplies, 4+1 hot-swappable fans
Features
48×25Gb SFP28 and 8×100Gb QSFP28 ports, backward compatible with 10G/40G
1+1 hot-swappable power supplies, 4+1 smart fans, front-to-back airflow
Supports VXLAN, EVPN, and MLAG for scalable data center virtualization
Supports OSPF/OSPFv3, BGP4/BGP4+, IS-IS, BFD, VRRP, and MPLS
Supports sFlow and RSPAN; manageable via Web, CLI, SNMP, and SSH
| Ports | 48 x 25G SFP28 & 8 x 100G QSFP28 |
| Switching Capacity | 6.4 Tbps |
| IPv4 Routes | 216K |
| IPv6 Routes | 108K |
| Forwarding Rate | 2800 Mpps |
| Flash Memory | 8 GB |
| MAC Address Table | 128K |
| Power Capacity | 800W x 2 |
| Fans | 5 (4+1 Redundancy), Hot-swappable |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Power Supplies | 2 (1+1 Redundancy), Hot-swappable |
| Dimensions (L x W x H) | 17.32″ × 18.50″ × 1.73″ (440 × 470 × 44 mm) |
AES6201 | 32 x 100G QSFP28
32-Port Ethernet L3 Switch, 32 x 100Gb QSFP28, Support VXLAN&MLAG, 1+1 redunt power supplies, 4+1 hot-swappable fans
Features
32×100Gb QSFP28 ports, backward compatible with 40GbE
1+1 hot-swappable power supplies, 4+1 smart fans, front-to-back airflow
Supports VXLAN, EVPN, and MLAG for scalable data center virtualization
Supports OSPF/OSPFv3, BGP4/BGP4+, IS-IS, BFD, VRRP, and MPLS
Supports sFlow and RSPAN; manageable via Web, CLI, SNMP, and SSH
| Ports | 32 x 100G QSFP28 |
| Switching Capacity | 6.4 Tbps |
| IPv4 Routes | 216K |
| IPv6 Routes | 108K |
| Forwarding Rate | 2800 Mpps |
| Flash Memory | 8 GB |
| MAC Address Table | 128K |
| Power Capacity | 800W x 2 |
| Fans | 5 (4+1 Redundancy), Hot-swappable |
| Operating Temperature | 0 to 40°C (32 to 104°F) |
| Power Supplies | 2 (1+1 Redundancy), Hot-swappable |
| Dimensions (L x W x H) | 17.32″ × 18.50″ × 1.73″ (440 × 470 × 44 mm) |
AIS2004P | 8GE, 12GE SFP, PoE/PoE+
8-Port Gigabit L2+ Industrial PoE+ Switch, 8 x PoE+ Ports @240W + 12 x 1Gb SFP, Fanless Design, -40 to 75°C Operating Temperature
Features
8×PoE+ ports (30W/port) and 12×1Gbps SFP ports for hybrid networks
Ideal for high-fiber PoE environments with wide-temp tolerance
±6KV/±4KV surge protection; dual power and alarm relay enhance stability
PD-Alive, SCP, one-click ring config, and storm suppression support
All-aluminum, corrosion-resistant shell with handheld portability
Manageable via AURC-Net, Web GUI, SSH, and Telnet
| Ports | 8GE+12GE SFP PoE/PoE+ |
| Switching Capacity | 40 Gbps |
| Forwarding Rate | 29.76 Mpps |
| Jumbo Frame | 9216 Bytes |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 5.71″ x 4.29″ x 2.44″ (145 x 109 x 62mm) |
AIS2004 | 8GE, 12GE SFP
8-Port Gigabit L2+ Industrial Ethernet Switch, 8 x 10/100/1000Mbps RJ45 + 12 x 1Gb SFP, Fanless Design, -40 to 75°C Operating Temperature
Features
8×Gigabit RJ45 and 12×SFP ports for high-density fiber deployments
Wide-temp support (-40°C to 75°C) in a lightweight, corrosion-resistant build
±6KV/±4KV surge protection, dual power supply, and relay alarm output
One-key ring config, PD-Alive, broadcast storm control for stable networking
Compact, fanless design with strong heat dissipation
Centralized via AURC-Net platform; installer-friendly portable build
| Ports | 8GE+12GE SFP |
| Switching Capacity | 40 Gbps |
| Forwarding Rate | 29.76 Mpps |
| Jumbo Frame | 9216 Bytes |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 5.71″ x 4.29″ x 2.44″ (145 x 109 x 62mm) |
AIS2002P | 8GE, 2GE SFP, PoE/PoE+
8-Port Gigabit L2+ Industrial PoE+ Switch, 8 x PoE+ Ports @240W + 2 x 1Gb SFP, Fanless Design, -40 to 75°C Operating Temperature
Features
8×PoE+ RJ45 ports and 2×SFP fiber ports; 30W per port
Durable, fanless design for harsh industrial environments
Operates between -40°C and 75°C with full surge and ESD protection
One-key ring config, PD-Alive, SCP, dual power with restart and relay alarm
Easy to deploy and install with handheld, corrosion-resistant design
Unified management through AURC-Net, Web, SSH, and Telnet
| Ports | 8GE+2GE SFP PoE/PoE+ |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 4.33″ x 3.54″ x 1.81″ (110 x 90 x 46mm) |
AIS2002 | 8GE, 2GE SFP
8-Port Gigabit L2+ Industrial Ethernet Switch, 8 x 10/100/1000Mbps RJ45 + 2 x 1Gb SFP, Fanless Design, -40 to 75°C Operating Temperature
Features
8×10/100/1000Mbps RJ45 ports and 2×1Gbps SFP uplinks
Wide temperature and ruggedized all-aluminum build (-40°C to 75°C)
Surge protection: ±6KV/±4KV; supports power-off recovery and relay alarm
Built-in PD-Alive, SCP, broadcast storm suppression, and ring support
Dual power inputs for redundancy and reliability in field deployments
Lightweight and easy to manage via AURC-Net and console interfaces
| Ports | 8GE+2GE SFP |
| Switching Capacity | 20 Gbps |
| Forwarding Rate | 14.88 Mpps |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 4.33″ x 3.54″ x 1.81″ (110 x 90 x 46mm) |
AIS2003P | 8GE, 4G Combo, PoE/PoE+
8-Port Gigabit L2+ Industrial PoE+ Switch, 8 x PoE+ Ports @240W + 4 x Combo GE Ports, Fanless Design, -40 to 75°C Operating Temperature
Features
8×PoE+ RJ45 ports and 4×1Gbps combo uplinks (RJ45/SFP)
Integrated PoE+ (30W/port) reduces wiring cost for smart devices
Operates at -40°C to 75°C with fanless, corrosion-resistant design
Industrial reliability: ±6KV surge, dual power, PD-Alive, SCP, alarm relay
Easy ring network setup and remote fault response
AURC-Net unified management and handheld enclosure for field flexibility
| Ports | 8GE+4G Combo PoE/PoE+ |
| Switching Capacity | 24 Gbps |
| Forwarding Rate | 17.86 Mpps |
| Jumbo Frame | 9216 Bytes |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 5.71″ x 4.29″ x 2.44″ (145 x 109 x 62mm) |
AIS2003 | 8GE, 4G Combo
8-Port Gigabit L2+ Industrial Ethernet Switch, 8 x 10/100/1000Mbps RJ45 + 4 x Combo GE Ports, Fanless Design, -40 to 75°C Operating Temperature
Features
8×Gigabit RJ45 and 4×combo ports (RJ45/SFP) for copper/fiber uplink flexibility
All-aluminum housing with wide -40°C to 75°C operating range
Built-in ±6KV/±4KV surge protection and relay alarm for system stability
One-click ring network setup, storm suppression, PD-Alive supported
Dual power inputs with auto-reboot and alarm output
Centralized management via AURC-Net platform; portable, rugged build
| Ports | 8GE+4G Combo |
| Switching Capacity | 24 Gbps |
| Forwarding Rate | 17.86 Mpps |
| Jumbo Frame | 9216 Bytes |
| Packet Buffer | 4.1Mbit |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 5.71″ x 4.29″ x 2.44″ (145 x 109 x 62mm) |
AIS2001P | 4GE, 2GE SFP, PoE/PoE+
4-Port Gigabit L2+ Industrial PoE+ Switch, 4 x PoE+ Ports @120W + 2 x 1Gb SFP, Fanless Design, -40 to 75°C Operating Temperature
Features
Ports: 4GE+2GE SFP PoE/PoE+
Jumbo Frame: 9216Bytes
Switching Capacity: 12 Gbps
Forwarding Rate: 8.92 Mpps
Packet Buffer: 4.1Mbit
Surge Protection: Differential mode ±2KV. Common mode ±6KV
Dimensions (LxWxH): 4.33″ × 3.54″ × 1.81″ (110*90*46mm)
Operating Temperature: -40°C ~ 75°C(-40°F to 167°F)
Operating Humidity: 5% ~ 95% non-condensing
| Ports | 4GE+2GE SFP PoE/PoE+ |
| Switching Capacity | 12 Gbps |
| Forwarding Rate | 8.92 Mpps |
| Jumbo Frame | 9216 Bytes |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 4.33″ x 3.54″ x 1.81″ (110 x 90 x 46mm) |
AIS2001 | 4GE, 2GE SFP
4-Port Gigabit L2+ Industrial Ethernet Switch, 4 x 10/100/1000Mbps RJ45 + 2 x 1Gb SFP, Fanless Design, -40 to 75°C Operating Temperature
Features
4×10/100/1000Mbps RJ45 ports and 2×1Gbps SFP uplinks for flexible connectivity
Wide operating temperature: -40°C to 75°C, fanless all-aluminum design
±6KV common mode & ±4KV differential surge protection for industrial safety
Supports one-key ring configuration, PD-Alive, and broadcast storm suppression
Dual power input design with power-down auto-restart and relay alarm support
Manageable via AURC-Net unified platform; compact and easy to install
| Ports | 4GE+2GE SFP |
| Switching Capacity | 12 Gbps |
| Forwarding Rate | 8.92 Mpps |
| Jumbo Frame | 9216 Bytes |
| Packet Buffer | 4.1Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±6KV |
| Dimensions (L x W x H) | 4.33″ x 3.54″ x 1.81″ (110 x 90 x 46mm) |
AIS4001P | 8GE, 4G SFP+, PoE/PoE+
8-Port L2+ Industrial Ethernet Switch, 8×10/100/1000Mbps PoE+ RJ45 + 4×10Gbps SFP+, Fanless Design, -40 to 75°C Operating Temperature
Features
8×PoE+ RJ45 ports and 4×10Gbps SFP+ for high-speed PoE+ uplink switching
Provides 30W per PoE port for edge power distribution
Industrial-grade housing, -40°C to 75°C, surge-protected and fanless
Dual power inputs with restart, relay alarm, and PD-Alive features
Simplified ring topology configuration and broadcast storm control
Unified via AURC-Net platform; portable, corrosion-proof construction
| Ports | 8GE+4G SFP+ PoE/PoE+ |
| Switching Capacity | 96 Gbps |
| Forwarding Rate | 71.42 Mpps |
| Jumbo Frame | 12k Bytes |
| Packet Buffer | 12Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±4KV |
| Dimensions (L x W x H) | 5.71″ x 4.29″ x 2.44″ (145 x 109 x 62mm) |
AIS4001 | 8GE, 4G SFP+
8-Port L2+ Industrial Ethernet Switch, 8 x 10/100/1000Mbps RJ45 + 4 x 10Gb SFP+, Fanless Design, -40 to 75°C Operating Temperature
Features
8×Gigabit RJ45 ports and 4×10Gbps SFP+ uplinks for high-throughput needs
Rugged fanless design with wide -40°C to 75°C operation range
±6KV/±4KV surge immunity, dual power input, alarm output
Supports PD-Alive, ring setup, storm suppression, and SCP
Compact aluminum enclosure, corrosion-resistant and easy to mount
Remote management via AURC-Net platform and standard CLI/Web/SSH
| Ports | 8GE+4G SFP+ |
| Switching Capacity | 96 Gbps |
| Forwarding Rate | 71.42 Mpps |
| Jumbo Frame | 12k Bytes |
| Packet Buffer | 12Mbit |
| Operating Temperature | -40°C ~ 75°C (-40 °F to 167 °F) |
| Operating Humidity | 5% ~ 95% non-condensing |
| Surge Protection | Differential mode ±2KV, Common mode ±4KV |
| Dimensions (L x W x H) | 5.71″ x 4.29″ x 2.44″ (145 x 109 x 62mm) |
Data Center Network
Powering Next-Gen Data Centers with Low Latency & Reliability
As AI, HPC, and cloud workloads grow more complex, modern data centers demand a network that is fast, scalable, and lossless. AurCore’s Data Center Network Solution delivers exactly that—with a high-performance spine-leaf architecture built for east-west traffic optimization, seamless scalability, and zero packet loss.
By leveraging 10G/25G/100G/400G switching at the leaf and spine layers, our solution enables high-bandwidth, low-latency connectivity between servers and compute nodes. MLAG-based reliability, ECMP load balancing, and advanced telemetry ensure intelligent traffic distribution and robust fault tolerance. Combined with support for VXLAN/EVPN and centralized management, AurCore empowers data centers to scale efficiently and operate with precision.
Scalable Spine-Leaf Architecture
Enables seamless horizontal expansion to meet growing data center demands.
VXLAN with EVPN Overlay
Builds large-scale Layer 2 networks for multi-tenant isolation and flexible deployment.
MLAG-Based Redundancy
Delivers high availability with active-active links and switch-level failover.
ECMP Traffic Balancing
Maximizes bandwidth efficiency through multipath load balancing.
RDMA-Optimized Lossless Fabric
Reduces latency and ensures zero packet loss for critical workloads.
Smart Network Visibility
Supports SNMP, telemetry, and centralized management for efficient operations.
Industrial Network
Resilient Ring Network for Industrial Automation
As industrial operations become more connected and data-driven, ensuring reliable communication across control centers and workshops is essential. AurCore’s Industrial Network Solution adopts a resilient ring topology, where each site and its subordinate workshops form a self-healing network that guarantees continuous, stable data transmission even in harsh and interference-prone environments.
Engineered for flexibility, availability, and reliability, the solution supports multiple aggregation modes to boost link bandwidth, enable load balancing, and provide robust link backup. With built-in support for rapid redundancy protocols such as STP, RSTP, MSTP, and ERPS, as well as a one-click ring configuration for fast recovery, network faults are resolved in milliseconds—minimizing downtime and maintaining real-time operational integrity.
Resilient Ring Topology
Ensures stable, self-healing communication between sites and workshops for uninterrupted operations.
Flexible Architecture
Modular network design with strong antiinterference capabilities tailored for complex industrial environments.
Link Aggregation Support
Boosts bandwidth and enables load balancing with multiple uplink and link backup configurations.
Rapid Fault Recovery
Supports STP, RSTP, MSTP, and ERPS with millisecond-level fault convergence via oneclick ring setup.
Bidirectional Traffic Switching
Enables seamless and reliable data transmission in both directions for enhanced network efficiency.
Centralized Control & Monitoring
Easily manage and monitor network healt through unified protocols like SNMP.
Enterprise Network
Build a smarter enterprise network with reliable, adaptive switches designed for seamless connectivity and broad device compatibility – across campuses, offices, and institutions.
Scalable and Reliable Networking for Modern Enterprise Campuses
As enterprise environments grow more dynamic and device-intensive, ensuring stable and scalable network infrastructure is critical. AurCore’s Enterprise Network Solution is built to support a wide range of deployment scenarios – from corporate campuses to hotels to schools and hospitals – delivering high-performance connectivity with simplified management.
Designed for reliability, compatibility, and ease of operation, the solution supports virtual stacking for device-level redundancy and automatic failover in the event of a network disruption. Multiple uplinks connect the core to each area, ensuring continuous service without interruption. With broad support for access devices such as APs, office terminals, and surveillance systems, and built-in remote operation and maintenance tools, AurCore enables enterprise networks to scale efficiently while keeping management streamlined and costs low.
Virtual Stacking Redundancy
Enables device-level backup and automatic failover to ensure uninterrupted network service.
Multi-Scenario Compatibility
Supports deployment across industrial parks, campuses, schools, and healthcare facilities.
Universal Device Access
Seamlessly connects APs, office terminals, surveillance systems, and other networked devices
Core-to-Edge Reliability
Multiple uplinks from core to edge ensure stable, redundant communication across departments.
Remote Operation & Maintenance
Simplifies network management with centralized tools for lower maintenance costs.
Easy Scalability
Flexible architecture allows the network to expand alongside growing business and user demands.
AI Network
Modern AI workloads demand high-performance, scalable, and cost-efficient networks. AurCore delivers advanced Ethernet switching solutions purpose-built for AI and ML infrastructures.
Powering AI at Scale with High-Speed, Zero-Loss Networking
AI is revolutionizing industries—from autonomous driving to smart devices – and behind every breakthrough is an AI data center built for speed, scale, and precision. As AI models grow, so does the need for ultra-reliable, low-latency infrastructure.
AurCore’s AI Network Solution delivers exactly that. With a full spine-leaf architecture, 100G/400G switching, RDMA-enabled transport, and VXLAN/EVPN support, we ensure lossless, balanced, and scalable connectivity—built to accelerate AI training and deployment from edge to core.
Scalable Spine-Leaf Architecture
Simplifies horizontal expansion for growing AI workloads.
High-Capacity Switching
100G/400G spine and leaf ports ensure sufficient bandwidth for intensive training.
Lossless Transport
RDMA and intelligent flow control eliminate packet loss during model training.
Low Latency Pathing
Ensures ultra-fast east-west traffic flow with balanced traffic distribution.
AI-Optimized Load Balancing
Technologies like Spray maximize throughput and efficiency.
Flexible Layer 2 Overlay
VXLAN/EVPN enables seamless migration and multi-tenant scalability.